CNC Turning Part International Exhibition, well-known Chinese manufacturers have the following exhibitors from around the world.

As a mobile tool brand around the world, more than 700 global brands and 900 R&D engineers will appear with their well-known brands at the 5th Boao Asia Spring Hainan Conference.

For a long time, the rapid development of the industrial parts industry can be seen everywhere in the world, and the "heart" of the machinery and equipment industry is on fire.

Generally speaking, combination screws or special fasteners are actually a type of spare parts due to the tight connection between various components.

The six major advantages of combination screws are that the common combination screws and matching combination screws commonly used in construction engineering are widely used,

The installation of the high-strength large hexagon bolt connection pair enters the website state. It is necessary to first prepare drawings, calculate the designed connection method, conduct business smoothly based on today's network, and make a manufacturing plan on the cage steel plate and fasteners (5G). The installation of flange bolts requires attention.

The description of the high-strength large hexagon bolt connection pair scheme is as follows: This scheme adopts a simple connection without adding any design such as assembly, welding, and fixation, which is convenient for rapid assembly and repair, and avoids material consumption.

Bevel gear reducers require the addition of a buffer sleeve and the use of sufficient fasteners to reduce impact deformation. If it is necessary to increase material delivery and adjust the main load equipment through adjusting screws, the main load equipment can be adjusted by limiting the amount of adjustment to ensure material flow, and the main load equipment can be equipped with thrusters on the driver and reducer. The wind rings of the main and auxiliary friction discs can be adjusted by adjusting screws to provide a lower range for the main load device.

The role of the mixed flow reducer shaft In order to obtain greater axial resistance, mixed oil and gas are filled into the reducer shaft, thereby driving the rotational axis and being separated by magnetic isolation. Mixing using a stirrer.

The reducer leaks oil. This is because once the noise output from the motor is not known about the oil leakage all morning, the error means that the motor leaks oil. Please do not replace the motor casually. First, take precautions from the following aspects.

1) Fault analysis detects and analyzes the noise of components connected to the motor. It will affect the noise level and manufacturing process of the reducer. The method for longer service life is to add engine oil for lubrication, with 20% being between 60-80 ° C. If the service life is longer, the noise will be reduced. The noise group is released. Reduce the regular sound of the gear reducer noise level, and reduce the regular sound of the gear reducer noise level.

Sharp corner chamfering, sudden changes in the deep inclination of the chamfer, slow down the load on the gear reducer, reduce vibration, and further increase mechanical noise.

Reverse tooth and reverse screw rounding increases the roughness, greatly reducing the accuracy of involute worm and gear rods with rounded corners.

Is a company that integrates tool development, production, and sales, specializing in deburring tools and flexible floating tools.

SAVANT discard type combined deburring and chamfering cutter is used to deburr an inner hole with a splash grinding wheel, while the boring hole can be freely converted for cleaning various hole shapes.